|
Victron Electrical Components |
Victron Energy offers a wide range of components for an integrated marine power system. Below are the most common components used on a boat or RV.
As an authorized Victron dealer we provide the full line of Victron products. We stock many of the marine power related products for shipment with our many marine solar power kits.
Contact us (773 965 2546) for pricing and availability of any Victron products not appearing on our website.
As an authorized Victron dealer we provide the full line of Victron products. We stock many of the marine power related products for shipment with our many marine solar power kits.
Contact us (773 965 2546) for pricing and availability of any Victron products not appearing on our website.
MPPT Control - MeterThe MPPT Control lets you see the status as well as setup all SmartSolar MPPT Charge Controllers that have a VE.Direct communications port. The new MPPT Control is mounted in the familiar BMV-700 series housing, maintaining a consistent and professional look to your panels and systems monitoring equipment.
|
Wall Mount for MPPT Control MeterThis accessory if for wall mounting the MPPT Control Meter. It avoids having to drill a hole the diameter of the meter. The wall mount sticks out from the wall about 1.5 inches.
|
VE.Direct Cable (3 M)This 3 meter (9 foot) cable is used to connect the MPPT Control meter to the solar controller.
It is also available as a 5 meter cable. |
Smart Battery Sense - Long RangeSmart Battery Sense is a wireless battery voltage and temperature sensor for Victron MPPT Solar Chargers.
With voltage and temperature sense in place, batteries will be better charged; improving charging-efficiency and prolonging battery life. For lead batteries, battery temperature data is used to adjust the charge-voltages: cold batteries require an increased charge-voltage, whereas hot batteries require a decreased charge-voltage. For lithium batteries temperature data is used to disable charging when they are too cold: charging lithium batteries near or below freezing causes permanent damage to the cells. |
VE.Direct to USB Interface CableThe VE.Direct to USB interface connects products with a VE.Direct connection to devices with a USB port, for example a computer. With this cable it is also possible to connect more than two VE.Direct products to a single CCGX.
|
BMV-712 Smart Battery MonitorWith Bluetooth built-in, the BMV Smart is ready for the Internet of Things (IoT) era. With Bluetooth being implemented in most other Victron Energy products, wireless communication between products will simplify system installation and enhance performance.
|
Orion-Tr Smart DC-DC Charger Non-IsolatedThe Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth.
For use in dual battery systems in vehicles or on boats where the alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch. The Orion-Tr Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power. Suitable for high temperatures up to 55°C with a full rated output up to 40°C. |