60 Foot Coil #10 AWG Marine Grade PV Solar Wire w/ MC4 Preinstalled
SKU:
CMP20375-60
$85.00
$85.00
per item
This 60 foot coil has a male MC4 connector preinstalled on one end and a female MC4 connector on the other. Cut the coil in half for two 30 foot runs from the solar array to the controller. Extra wire can be used to run from the controller to the battery bank.
Conductor: Stranded Tinned Copper (84 Strands)
Insulation: Halogen free cross linked polyolefin
Sheath: Halogen free cross linked polyolefin
Wire Diameter: .25 inches with sheath (6mm)
Wire is single conductor
We are here to help with any questions you have!
The proper wire from the panel to the controller and batteries is important to minimize voltage drop and thus obtain maximum performance from your solar panel. Our wire is made for the marine environment and will provide optimal power throughput with minimal voltage drop.
Conductor: Stranded Tined Copper (84 Strands)
Insulation: Halogen free cross linked polyolefin
Sheath: Halogen free cross linked polyolefin
Nominal Cross-Section: 6mm²
Rated Temperature: -40~﹢90℃
Rated Voltage: DC:1.8kV --AC:0.6/1kV
Finished cable O.D. 7.1 ±0.1mm
Conductor resistance（20℃):≤3.39Ω /km
Rated Current: 25~32A
Weathering Resistance: UV
Burning Behavior: (IEC60332-1)
Conductor: Stranded Tined Copper (84 Strands)
Insulation: Halogen free cross linked polyolefin
Sheath: Halogen free cross linked polyolefin
Nominal Cross-Section: 6mm²
Rated Temperature: -40~﹢90℃
Rated Voltage: DC:1.8kV --AC:0.6/1kV
Finished cable O.D. 7.1 ±0.1mm
Conductor resistance（20℃):≤3.39Ω /km
Rated Current: 25~32A
Weathering Resistance: UV
Burning Behavior: (IEC60332-1)