The Tracer BN marine series controllers are EP Solar’s second generation of MPPT controllers. They have rapid MPP (Maximum Power Point) calculation capability to achieve the maximum output of a solar array. At 99.5% efficiency they are one of the most energy efficient controllers available which means they will convert the maximum amount of solar energy to battery charging power.
These controllers also have extensive communication ability. You can monitor your solar panel performance through your laptop computer or through the MT50 remote display. An option to monitor solar system performance through Bluetooth or WiFi is also available.
The die-cast aluminum design ensures excellent heat dispersion; no heat dissipating fans are required. The Tracer BN package includes the MT50 remote display. The Tracer BN can be programmed from the MT50 remote display or from a computer connected via special cable.
Features ◆ Advanced MPPT technology, with efficiency no less than 99.5% ◆ Maximum conversion efficiency of 98% ◆ Ultra-fast tracking speed and guaranteed tracking efficiency ◆ Accurately recognize and track multiple power points ◆ Reliable automatic limit function of maximum PV input power, ensuring no overload ◆ Die-cast aluminum design, ensuring excellent heat dissipation characteristic ◆ Automatically detect 12 and 24 volt systems ◆ Support 4 charging options: Sealed, Gel, Flooded and User. ◆ Battery temperature compensation function. ◆ Real-time energy statistics function. ◆ Real-time data monitoring and parameter setting using PC and/or external display with RS-485 communication bus ◆ Support software upgrade.
Electronic protection ◆ PV short circuit protection ◆ PV over current protection ◆ PV reverse polarity protection ◆ Battery over voltage protection ◆ Battery over discharge protection ◆ Battery reverse polarity protection ◆ Load overload protection ◆ Load short circuit protection ◆ Battery overheating protection ◆ Controller overheating protection
Technical Specifications
Wiring Diagram for Tracer BN Controller with Two Panels in Parallel
The MT50 Remote Display is used to monitor the performance of the solar panels including volts, amps, watts and cumulative watts. It also displays the state of charge of the battery bank and the controller status. It is used to easily program the operating parameters of the Tracer BN controller.
The display includes a 10 foot (3 meter) cable with RJ45 connectors that simply plug into the controller and the display.
This display is included with all of our Tracer BN Controllers.
Features • Display all the operating data and system working status • Simple and convenient operation • Real-time alarm and failure information • Longer communication distance based on RS485 • Diversified load control modes : Manual Control, Light ON/OFF, Light ON+ Timer, Time Control • Specify battery type: Gel, sealed, flooded and User(programable) • Set Tracer BN programmable parameters • Accumulate and display energy statistics
The optional remote temperature sensor constantly measures and displays storage battery temperature so the controller can adjust charge rate appropriately (slow down or stop charging if batteries get overheated). This is important for systems over 200 watts with lead acid batteries and especially important when using temperature sensitive gel batteries. This option could increase battery life by 100-200 charge/discharge cycles.
The sensor plugs into the Tracer BN Controller and is attached to the top of a battery in the battery bank with tape or adhesive.
Tracer BN Ordering and Pricing
Tracer 1215BN 12/24V 10A MPPT Controller and MT50 Remote Display
The 10 amp Tracer controlleris designed for solar arrays up to 130 watts. The Tracer BN series has rapid MPP (Maximum Power Point) calculation capability to achieve the maximum output of a solar array. It also has extensive communication ability. The die-cast aluminum design ensures excellent heat dispersion. The Tracer BN package includes the MT50 external display. The Tracer BN can be programmed from the MT50 external display or from a PC computer connected via optional cable.
$
159.00
Tracer 2215BN 12/24V 20A MPPT Solar Controller and MT50 Remote Display
The 20 amp Tracer controlleris designed for solar arrays up to 260 watts. The Tracer BN series has rapid MPP (Maximum Power Point) calculation capability to achieve the maximum output of a solar array. It also has extensive communication ability. The die-cast aluminum design ensures excellent heat dispersion. The Tracer BN package includes the MT50 external display. The Tracer BN can be programmed from the MT50 external display or from a PC computer connected via optional cable.
$
239.00
Tracer 3215BN 12/24V 30A MPPT Solar Controller and MT50 Remote Display
The 30 amp Tracer controlleris designed for solar arrays up to 390 watts. The Tracer BN series has rapid MPP (Maximum Power Point) calculation capability to achieve the maximum output of a solar array. It also has extensive communication ability. The die-cast aluminum design ensures excellent heat dispersion. The Tracer BN package includes the MT50 external display. The Tracer BN can be programmed from the MT50 external display or from a PC computer connected via optional cable.
$
339.00
Tracer 4215BN 12/24V 40A MPPT Solar Controller and MT50 Remote Display
The 40 amp Tracer controlleris designed for solar arrays up to 520 watts. The Tracer BN series has rapid MPP (Maximum Power Point) calculation capability to achieve the maximum output of a solar array. It also has extensive communication ability. The die-cast aluminum design ensures excellent heat dispersion. The Tracer BN package includes the MT50 external display. The Tracer BN can be programmed from the MT50 external display or from a PC computer connected via optional cable.
$
429.00
MT50 Remote Display for Tracer and Xtra MPPT Solar Controllers
Monitor Solar Panel performance and program the Tracer BN and Xtra-N MPPT Controller. This display includes a 10 foot (3 meter) cable for attaching to the controller.
$
69.00
Remote Temperature Sensor for EP MPPT Solar Controllers
This temperature sensor includes a 6 foot (2 meter) cable. It plugs into the solar controller and is attached to a battery in the battery bank.